Thermal stainless-steel 20-ounce milk containerKeeps cold milk chilled for up to 8 hoursWorks with Impressa, GIGA and ENA automatic coffee and espresso centers Sleek, attractive design; secure fitting lid; wash by handMeasures approximately 4 x 6 x 9-1/2 inchesBeautiful, compact design.
Thermal stainless-steel 20-ounce milk containerKeeps cold milk chilled for up to 8 hoursWorks with Impressa, ENA automatic coffee and espresso centers Sleek, attractive designSecure fitting lidWash by handBeautiful, compact design.
Always cold milk for lattes and cappuccinosThe elegant Cool Control Basic cools the milk to as much as 25 ° below the ambient temperature. Once the temperature reaches 39 °F, it is maintained constantly within the optimum range. This prevents freezing and saves energy.Keeps milk constantly as cold as in your refrigerator and prevents milk from freezingFits all IMPRESSA and ENA fully automatic coffee machinesCan be placed on the left or right side of the fully automatic coffee machineLow noise, low wattage system costs only pennies a dayRemovable stainless steel milk container holds 20-ozBeautiful, compact design.
Taste, odor & chlorine reductionScale inhibitorFIltration degree: 10 micron reductionService Life 1,250 Gal. / 6 months.
Double boilers – the user can operate the coffee boiler alone or the coffee and steam boiler together, however the coffee boiler must be powered on when using the steam boiler Three stage power switch allows user to operate espresso machine with coffee boiler only or both boilers simultaneouslyPID (Proportional, Integral, Derivative) allows user to manage temperature control of the coffee boiler . If you are not sure what PID is, here is an overview.Small water reservoir at 1.2 liters allows approximately 20 double shots to be extracted without a refill – refill can occur on the fly while the machine is operating.OPV (over pressure valve) feeds excess water pressure to the drip tray and not the water reservoir – this will allow operation of the direct water connection with having the reservoir fill with overflow water, get moldy, and require constant emptying and cleaning.The drip tray can be drained manually or connected to a drain WITHOUT purchasing any optional kits.Insulation on coffee and steam boilers helps save energyOnly up to 15 amps required without any additional switches or internal adjustments.Commercial-grade motor and rotary vane pump with ability to make a direct water connection or use a water reservoir on the same machine. Includes stainless steel braided hose with 3/8″ male thread.Vibiemme’s Power Management Control System (PMCS) automatically regulates variable power to each heating element. The total amperage draw of the machine will never go over 15 amps using 110-120 volts.Quality Characteristics and Specifications found Vibiemme StyleHeavy duty true Vibiemme E61 group head maintains active flow of water from the group head to the heat exchanger in the boilerProfessional grade brass portafilters – one portafilter with single spout and single filter basket and one portafilter with dual spout and double filter basketCoffee boiler capacity/material: 0.5 liter copper boilerSteam boiler capacity/material: 1.9 liter copper boilerBoiler pressure gauge to indicate steam boiler pressure.Boiler pressure is controlled by the PID which connects directly to the boiler Pump pressure gauge to indicate brew pressure during espresso extraction (reading will vary while not extracting)Multi-directional stainless steel steam wand on left side can be moved in different directionsMulti-directional stainless steel hot water wand on right side can be moved in different directionsPower indicator light on right side indicates when the machine is powered onHeating light on left side indicates when espresso machine is heatingLow water level light in middle indicates when water level in water reservoir in rear is lowThree stage power switch allows user to operate espresso machine with coffee boiler only, with steam boiler only, OR with both boilers simultaneously (awaiting confirmation once shipment arrives)Extremely large stainless steel drip tray which can be easily (slides out with pull of handle) removed for cleaning. Grate stays on machine when pulling out drip tray so that it is one step removal to empty.GICAR branded electronic water level control and reacts to a .02 of C of temperature change in the coffee boilerRotary vane pump and commercial-grade motor is quieter than a vibration pump, but it is more expensive to replace. hence, descaling is importantOPV (over pressure valve opens when too much pump pressure exists) located in rear of machine with easy access when body panel and six (6) associated screws and divider are removed. Although the pump has an adjustment screw for regulation, the OPV is an additional feature to manage overflow that may be caused by overpressure from the water company when the machine is plumbed in.Accessories: Single spout portafilter, single dose filter basket, double spout portafilter, double dose filter basket, blind filter basket for back flushing, plastic coffee scoop, and a common useless plastic tamper (please make sure to order a good tamper)2-Years warranty.
Mirror-polished stainless steel body panelHeavy duty True Faema E61 grouphead maintains active flow of water from the grouphead to the heat exchanger in the boiler.The heat exchanger allows you to make espresso after espresso until water reservoir is emptied. You can also steam immediately before, during, or immediately after extracting an espresso without any wait timeProfessional grade brass portafilters – one portafilter with single spout and single filter basket and one portafilter with dual spout and double filter basket.Insulation on coffee and steam boilers helps save energy Brew Boiler: Solid Copper, .60 Liter, 60mm diameterCoffee Boiler capacity: 1.8 liter solid vertical copper boiler Heating Element – Brew boiler 600 watts controlled by bulb thermostat adjustable with 2 degree C incrementsSteam Boiler capacity: 0.75 liter solid vertical copper boiler 70mm diameterHeating Element – Steam Boiler 1600 watts controlled by a Jaeger pressurstat. Removable 2.0 liter pour-over water reservoirBoiler pressure gauge to indicate steam boiler pressure (reading will vary between 1.1 and 1.5 bar pressure). The setting can be varied by adjusting the pressurstat through the access port under the cup warmer tray on top of machine Pump pressure gauge to indicate brew pressure during espresso extraction (reading will vary while not extracting).Multi-directional stainless steel steam wand on left side can be moved in different directions.Multi-directional stainless steel hot water tap on right side can be moved in different directions.Power indicator light on right side indicates when the machine is powered onHeating light on left side indicates when espresso machine is heatingLow water level light in middle indicates when water level in water reservoir in rear is lowTwo independent power switches allows user to operate espresso machine with coffee boiler only, with steam boiler only, OR with both boilers simultaneously Jaeger pressurstat monitors boiler pressure in steam boiler. This pressurstat is adjustable by the operator through a port hole on top.Stainless steel drip tray which can be easily (slides out with pull of handle) be removed for cleaning. Grate stays on machine when pulling out drip tray so that it is one step to empty.ProLind branded electronic water level control for internal coffee boiler tuned to 2 degree C changes41 watt vibratory pump (“vibe” pump) rated up to 15 bar with air valve bypass.OPV (over pressure valve opens when too much pump pressure exists) located inside of machine with easy access when body panel and six (6) associated screws and divider are removedAccessories: Single spout portafilter, single dose filter basket, double spout portafilter, double dose filter basket, blind filter basket for backflushing, plastic coffee scoop, and a common useless plastic tamper (please make sure to order a good tamper)Dimensions: 9″ W x 17″ D x 16″ H — Depth with both wands out: 14″ width — Drip Tray: 8 3/8 W x 6 3/8 D x 2 1/4 H 2-Years WarrantyProduct Safety Listing: UL Commercial for home and office use (please note that NSF approvals have not been applied for use in coffee shops, restaurants, and other food service establishments. Please check with your local health department if NSF is required for your food service establishment).Electrical Power requirements: 115 volts 1600 watts, 15 amp.
Double boilers – the user can operate a coffee boiler and steam boiler independently of each other. Seriously, many double boilers have the water fro the coffee boiler pass through the steam boiler first to get pre-heated. If you turn off the steam boiler on those machines, that water is colder and can affect temperature performance. With the dual heating element in the Vibiemme’s coffee boiler, the steam boiler does not have to be powered on as the extra element will provide more power to heat the coffee boiler.Did we say that the coffee boiler was 0.5 liters? Smaller means more turnover to of fresh incoming water? Heat exchanger machines were very popular due to the increased water turnover.PID (Proportional, Integral, Derivative) allows user to manage temperature control of the coffee boiler . If you are not sure what PID is, here is an overview.Water reservoir at 2.1 liters allows approximately 20 double shots to be extracted without a refill – refill can occur on the fly while the machine is operating.OPV (over pressure valve) feeds excess water pressure to the drip tray and not the water reservoir – this will allow operation of the direct water connection with having the reservoir fill with overflow water, get moldy, and require constant emptying and cleaning.The 54 ounce drip tray can be drained manually or connected to a drain without the need of purchasing any optional kitsInsulation on coffee and steam boilers helps save energyWater does not have to be placed in the reservoir, nor does any wiring under the drip tray have to be reconfigured for the machine to function in direct connect modeOnly up to 15 amps required without any additional switches or internal adjustments.Commercial-grade motor and vibration pump with ability to make a direct water connection or use a water reservoir on the same machine. Includes stainless steel braided hose with 3/8″ male thread.Accessories: Single spout portafilter, single dose filter basket, double spout portafilter, double dose filter basket, blind filter basket for back flushing, plastic coffee scoop, and a common useless plastic tamper (please make sure to order a good tamper).2-Years WarrantyDimensions: 10.6 W x 21.0 D x 16.5 H-inProduct Safety Listing: UL Commercial for home and office use (please note that NSF approvals have not been applied for use in coffee shops, restaurants, and other food service establishments. Please check with your local health department if NSF is required for your food service establishment)..
Reduces water hardness to improve the appearance and flavor of water for your espresso and coffee. Filter should be changed every 2 months, as indicated by the date dial on the Filter Holder Handle. For use with Breville espresso machines and single cup brewers models: BES900XL BES860XL BES840XL BKC700XL BKC600XL To be used with the Holder Handle and Filter Mesh.
True Faema E61 grouphead is heaviest in its class and maintains active flow of water from the grouphead to the heat exchanger in the boilerThe heat exchanger allows you to make espresso after espresso until water reservoir is emptiedProfessional grade brass portafilters – one portafilter with single spout and single filter basket and one portafilter with dual spout and double filter basketBoiler capacity: 1.8 liter copper boiler with heat exchanger for on demand steamRemovable 2.1 liter (71 Fluid oz) pour-over water reservoirBoiler pressure gauge to indicate boiler pressure (reading will vary between .8 and 1.2 bar pressure). The setting can be varied by adjusting the full size pressure stat through the access port under the cup warmer tray on top of machine.Pump pressure gauge to indicate brew pressure during espresso extraction (reading will vary while not extracting)Multi-directional stainless steel steam wand on left side can be moved in different directionsMulti-directional stainless steel hot water tap on right side can be moved in different directionsPower indicator light on right side indicates when the machine is powered on.Heating light on left side indicates when espresso machine is heatingLow water level light in middle indicates when water level in water reservoir in rear is lowThree stage power switch allows user to fill internal boiler without sending power to the heating element (prevents damage upon initial start up).Full size Parker pressure stat (rated as one of the best boiler pressure regulators) monitors boiler pressureExtremely large stainless steel drip tray which can be easily (slides out with pull of handle) removed for cleaning. Grate stays on machine when pulling out drip tray so that it is one step to empty.GICAR branded electronic water level control for internal boiler is located in lower right rear corner of machine where there is least heat build up41 watt vibratory pump (“vibe” pump) rated up to 15 bar with air valve bypassLargest OPV (over pressure valve opens when too much pump pressure exists) located in rear of machine with easy access when body panel and six (6) associated screws are removed.Accessories: Single spout portafilter, single dose filter basket, double spout portafilter, double dose filter basket, blind filter basket for back flushing, plastic coffee scoop, and a common useless plastic tamper (please make sure to order a good tamper).2-Years WarrantyDimensions: 10.6 W x 21.0 D x 16.5 H-inProduct Safety Listing: UL Commercial for home and office use (please note that NSF approvals have not been applied for use in coffee shops, restaurants, and other food service establishments. Please check with your local health department if NSF is required for your food service establishment)..
This is everything you need to install a Keurig brewer B150, B145, B155, B200 or B3000; will also fit new models K150, K150P, K155, K3000Kit includes:Everpure water cartridge model 2CBGW & 3/4 FGHQL 1 Head with BracketInlet Ball valveAngle stop valves: 3/8-in Comp x; 3/8-in Fe Comp x 1/4-in QC15 Ft Tubing.